Set Qos Policer Mode; Set Qos Policer Exceed-Action - Zte ZXR10 2900E Series Command Reference Manual

4.14.41 set qos policer mode

Purpose
This command sets a flow policer.
Command Mode
Global configuration mode
Syntax
set qos policer <0-383> mode {aware | blind} cir <32-1048576> cbs <20000-268435456>{ebs
<20000-268435456>| pir <32-1048576> pbs <20000-268435456>}
Parameter Description
Parameter
<0-383>
aware
blind
cir <32-10485760>
cbs <20000-268435456>
ebs <20000-268435456>
pir <32-10485760>
pbs <20000-268435456>
Example
The following example sets a flow policer to color-sensitive mode, cir=64, cbs=20000,
pir=128, and pbs=30000:
zte(cfg)#set qos policer 0 mode aware cir 64 cbs 20000 pir 128 pbs 30000
policer 0:the real configured cir is 64Kbps,cbs is 20000Bytes,pir is 128Kbps,
pbs is 30000Bytes

4.14.42 set qos policer exceed-action

Purpose
This command sets a flow policer action.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Flow policer ID. 0 to 255 are used for ingress ACLs. 256 to 383
are used for egress ACLs.
Color-sensitive mode.
Blind mode.
Committed information rate (Kbps).
Committed burst size (bytes).
Excess burst size (bytes).
Peak rate (Kbps).
Peak burst size (bytes).
4-333
Chapter 4 Service Configuration
ZTE Proprietary and Confidential