Zte ZXR10 2900E Series Command Reference Manual page 331

Parameter Description
Parameter
<1-500>
permit
deny
other
ether-type <1501-65535>
dsap-ssap <0-65535>]
cos <0-7>
<vlan-id>
<vlan-mask>
<source-macvlan-id>
<mac-mask>
any
<dest-mac>
<dmac-mask>
any
Guidelines
Other rules can match packets with ether-type fields, dsap-ssap fields, cos fields, VLAN
fields, specified source MACs, any source MACs, specified destination MACs, or any
destination MACs.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for the packets except IP/ARP. IP/ARP
packet ignores this rule.
This rule is only valid for the packet with specified ether-type value.
Ignore this rule for other messages. The range of ether-type is
1501 to 65535.
This rule is only valid for the packet with specified dsap-ssap
value. Ignore this rule for other messages. The range of
dsap-ssap is 0 to 65535.
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Optional VLAN mask. The default value is 0xfff.
Source MAC address of the transmitted packet.
Source MAC mask. Compare the result of the source MAC
address & the mask of the packet with the result of <source-mac>
& the mask to see whether the ACL rule is matched.
The any keyword is used as the abbreviation of source MAC
address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
Destination MAC address of the transmitted packet.
Destination MAC mask.
The any keyword is used as the abbreviation of destination MAC
address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
4-271
Chapter 4 Service Configuration
ZTE Proprietary and Confidential