Show Mac Learning Except Session; Show Mac Learning Except Bind; Set Mac Delete Peak - Zte ZXR10 2900E Series Command Reference Manual

4.7.38 show mac learning except session

Purpose
This command shows sessions that do not learn specific source MAC addresses.
Command Mode
All configuration modes
Syntax
show mac learning except session [<1-100>]
Example
zte(cfg)#show mac learning except session 1
Mac Learning Exception Session Status
Session-Id
---------------------------------------------------------------
1

4.7.39 show mac learning except bind

Purpose
This command shows the binding relationship between ports/trunks and sessions.
Command Mode
All configuration modes
Syntax
show mac learning except {port <portlist>|trunk<trunklist>}
Example
zte(cfg)#show mac learning except port 1
Mac Learning Exception Port Bind Session
Port-Id
-------------------------------
1

4.7.40 set mac delete peak

Purpose
This command deletes peak MAC value and time.
SJ-20130731155059-003|2013-11-27 (R1.0)
Mac-Address
00.11.22.33.44.55 ff.ff.ff.00.00.00
Session-List
4-115
Chapter 4 Service Configuration
MAC-Mask Vlan-ID
100
ZTE Proprietary and Confidential