List Include; Show Terminal Log Include - Zte ZXR10 2900E Series Command Reference Manual

Default
The autosave interval is twenty-four hours by default.

4.1.37 list include

Purpose
This command shows commands that contain the specified character string.
Command Mode
All configuration modes
Syntax
list include <string>
Parameter Description
Parameter
<string>
Example
The following example searches for all IGMP-related commands:
zte(cfg)#list include igmp

4.1.38 show terminal log include

Purpose
This command shows logs that contain the specified character string.
Command Mode
All configuration modes
Syntax
show terminal log include <string>
Parameter Description
Parameter
<string>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Character string in the commands to be searched for. Spaces
are not supported.
Description
Character string in the logs to be searched for. Spaces are not
supported.
4-21
Chapter 4 Service Configuration
ZTE Proprietary and Confidential