Set Stp Port Bpdu-Guard; Set Stp Bpdu-Interval - Zte ZXR10 2900E Series Command Reference Manual

4.12.7 set stp port bpdu-guard

Purpose
This command enables or disables the Bridge Protocol Data Unit (BPDU) protection
function for ports.
Command Mode
Global configuration mode
Syntax
set stp port <portlist> bpdu-guard {enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
If the protection function is enabled, when the ports receive a BPDU message, the ports
will be disconnected.
Default
The BPDU protection function is disabled.
Example
The following example enables the BPDU protection function for port 2:
zte(cfg)#set stp port 2 bpdu-guard enable

4.12.8 set stp bpdu-interval

Purpose
This command sets the interval for BPDU protection recovery.
Command Mode
Global configuration mode
Syntax
set stp bpdu-interval <10-65535>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the BPDU protection function for ports.
Disables the BPDU protection function for ports.
4-197
Chapter 4 Service Configuration
ZTE Proprietary and Confidential