Set Syslog Level - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set syslog module {all | arp-inspection| commandlog|dhcp| radius | AAA}{enable | disable}
Parameter Description
Parameter
all
arp-inspection
commandlog
dhcp
radius
AAA
enable
disable
Example
The following example enables the syslog function of all modules:
zte(cfg)#set syslog module all enable

4.22.2 set syslog level

Purpose
This command sets the level of syslog information.
Command Mode
Global configuration mode
Syntax
set syslog level {emergencies | alerts | critical | errors | warnings | notifications | informational
| debugging }
Parameter Description
Parameter
emergencies
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables or disables the syslog function of all modules. By default,
the function is disabled.
Enables or disables the syslog function of the DAI modules. By
default, the function is disabled.
Enables or disables the syslog function of commandlog module.
By default, the function is disabled.
Enables or disables the syslog function of the DHCP modules. By
default, the function is disabled.
Enables or disables the syslog function of RADIUS modules. By
default, the function is disabled.
Enables or disables the syslog function of AAA modules.
Enables the syslog function.
Disables the syslog function.
Description
Level 1, emergent error
4-413
Chapter 4 Service Configuration
ZTE Proprietary and Confidential