Show Aaa Mac-Authentication Client; Lacp Configuration; Set Trunk Pvid - Zte ZXR10 2900E Series Command Reference Manual

zte(cfg-nas)#show aaa mac-authentication
Mac authentication
Session 1 is setted
mac address
mac mask
Session 2 is setted
mac address
mac mask

4.8.8 show aaa mac-authentication client

Purpose
This command shows the information about the clients that are authenticated by MAC
addresses.
Command Mode
All configuration modes
Syntax
show aaa mac-authentication client
Example
The following example shows the status of the clients that are authenticated by MAC
addresses:
zte(cfg-nas)#show aaa mac-authentication client
MaxClients

4.9 LACP Configuration

4.9.1 set trunk pvid

Purpose
This command sets the default PVID for trunks.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
: disabled
:00.1d.0f.22.57.0c
:ff.ff.ff.ff.00.00
:00.19.e0.1a.97.dd
:ff.ff.ff.ff.00.00
: 256 OnlineClients : 0
4-121
Chapter 4 Service Configuration
ZTE Proprietary and Confidential