Ingress-Acl Hybrid Rule Type-Udp - Zte ZXR10 2900E Series Command Reference Manual

Parameter
dscp <0-63>
fragment
cos <0-7>
<vlan-id>
<vlan-mask>
<source-mac>
<smac-mask>
any (third)
<dest-mac>
<dmac-mask>
any (fourth)
Guidelines
The TCP rule can match source-specified IPs, any source IPs, destination-specified
IPs, any destination IPs, DSCP fields, IP fragment fields, cos fields, VLAN fields,
source-specified MACs, any source MACs, destination-specified MACs, and any
destination MACs.

4.13.29 ingress-acl hybrid rule type-udp

Purpose
This command sets the rule that the hybrid ingress ACL matches the IPv4-UDP packet.
Command Mode
Hybrid ingress ACL configuration mode
Syntax
rule <1-500>{permit | deny} udp {<source-ipaddr><sip-mask>| any}[source-port <0-65535><s
port-mask>]{<destination-ipaddr><dip-mask>| any}[dest-port <0-65535><dport-mask>][dscp
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
This rule is only valid for messages with the specified DSCP
value. Ignore this rule for other messages. The range of DSCP
value is 0 to 63.
This rule is only valid for fragment messages. For non-fragment
messages, this rule is ignored.
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Optional VLAN mask. The default value is 0xfff.
Source MAC address of the transmitted packet.
Source MAC mask.
The any keyword is used as the abbreviation of the source MAC
address 00.00.00.00.00.00 and the mask 00.00.00.00.00.00.
Destination MAC address of the transmitted packet
Destination MAC address of the transmitted packet
The any keyword is used as the abbreviation of the destination
MAC address 00.00.00.00.00.00 and the mask 00.00.00.00.00.00.
4-237
Chapter 4 Service Configuration
ZTE Proprietary and Confidential