Set Garp Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

Example
The following example configures VLANs 2 and 4 to permit dynamically adding ports 2 and
4, and configures VLANs 3 and 5 to forbid dynamically adding ports 3 and 5:
zte(cfg)#set vlan 2,4 permit port 2,4
zte(cfg)#set vlan 3,5 forbid port 3,5
zte(cfg)#show vlan
VlanType: 802.1q vlan
VlanId
VlanName:
VlanMode: Static
Tagged ports
Untagged ports
Untagged trunks : 1-15
Forbidden ports :
VlanId
VlanName:
VlanMode: Static
Tagged ports
Untagged ports
Forbidden ports : 3,5
VlanId
VlanName:
VlanMode: Static
Tagged ports
Untagged ports
Forbidden ports : 3,5
Total Vlans: 3
zte(cfg)#

4.24.2 set garp enable/disable

Purpose
This command enables or disables the GARP function.
Command Mode
Global configuration mode
Syntax
set garp {enable | disable}
SJ-20130731155059-003|2013-11-27 (R1.0)
: 1 VlanStatus: enabled
:
: 1-28
: 3 VlanStatus: disabled
:
:
: 5 VlanStatus: disabled
:
:
Chapter 4 Service Configuration
4-425
ZTE Proprietary and Confidential