Show Mac Logging-Alarm; Set Mac Learning Except Session - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Example
zte(cfg)#show mac filter
MAC Filter Configuration :
Flags: Per - permanent, Stc - static, ToP - to_permanent, ToS - to_static,
Sav - auto saved mac address, SrF - source filter,
DsF - destination filter, Time - day:hour:min:sec,
Frm - mac from where:0,LEARN; 1,CONFIG; 2,DUPLICATE; 3,VPN; 4,802.1X;
MAC_Address
-----------------------------------------------------------------------------
0000.0000.0001

4.7.34 show mac logging-alarm

Purpose
This command shows the MAC event alarm configurations.
Command Mode
All configuration modes
Syntax
show mac logging-alarm
Example
zte(cfg)#show mac logging-alarm
MAC Logging Alarm Switch Table:
logging-alarm station-move: enable
logging-alarm threshold-state: disable

4.7.35 set mac learning except session

Purpose
This command sets a session that does not learn specific MAC addresses.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
5,LAYER-3; 6,DHCP
Vlan_Id Port Per Stc ToP ToS Sav SrF DsF Frm
1 - 0
4-112
1 0 0 - 1 1
ZTE Proprietary and Confidential
Time
1 00:00:58:09