Read Ltm Trans-Id - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
<1-64>
smep-id <1-8191>
dmep-id <1-8191>
dmep-mac <hh.hh.hh.hh.hh.hh>
dmip-mac <hh.hh.hh.hh.hh.hh>}
<1-64>
<5-10>
Default
The default value of the ttl/timeout parameter is 64/5.
Example
The following example initiates an LTM detection in md session 1 ma session 1. The
source MEP ID is 1000, and the destination MEP ID is 2000.
zte(cfg)#cfm ltm md-session 1 ma-session 1 smep-id 1000 dmep-id 2000

4.43.27 read ltm trans-id

Purpose
This command shows the path tree of an LTM response.
Command Mode
Global configuration mode
Syntax
cfm ltm read trans-id <1-4294967295>
Parameter Description
Parameter
<1-4294967295>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
MP session ID, including MEP and MIP, unique within a switch.
ID of the source MEP sending LTM packets.
ID of the destination MEP receiving the LTM packets.
MAC address of the destination MEP receiving the LTM packets.
MAC address of the destination MEP receiving the LTM packets.
Maximum number of LTM hops.
Timeout duration of the LTM detection.
Description
Unique ID of an LTM packet
4-590
ZTE Proprietary and Confidential