Set Pppoe-Plus Mode Port; Zesr Configuration; Set Zesr Ctrl-Vlan Protect-Instance - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
PPPoE VST remote ID on port 2: port2

4.28.7 set pppoe-plus mode port

Purpose
This command sets the mode of handling dynamic user information on a port.
Command Mode
Global configuration mode
Syntax
set pppoe-plus mode port < portlist>{default | drop | modify }
Parameter Description
Parameter
< portlist>
default
drop
modify
Guidelines
When a PPPoE packet carrying the pppoe+tag information is received, the port directly
forwards the packet to the server if the mode is default, or discards the packet if the mode
is drop, or replaces the pppoe+tag with the local pppoe+tag and then forwards the packet
to the server if the mode is modify.

4.29 ZESR Configuration

4.29.1 set zesr ctrl-vlan protect-instance

Purpose
This command binds a control VLAN to a STP instance.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Default mode, in which the pppoe+tag information in packets will
not be modified.
Drop mode, in which the packets carrying the pppoe+tag
information will be discarded.
Modify mode, in which the pppoe+tag information in packets will
be replaced by the local pppoe+tag information.
4-476
ZTE Proprietary and Confidential