Show Gvrp - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set gvrp {port <portlist>| trunk <trunklist>} registration {normal | fixed | forbidden}
Parameter Description
Parameter
port <portlist>
trunk <trunklist>
normal
fixed
forbidden
Default
Ports/trunks can be added to dynamic VLANs.

4.24.8 show gvrp

Purpose
This command shows the GVRP configuration.
Command Mode
All configuration modes
Syntax
show gvrp
Example
The following example shows the GVRP configuration:
zte(cfg)#show gvrp
GVRP is enabled!
PortId Status
------ -------- ------------ -----------------
1
18
SJ-20130731155059-003|2013-11-27 (R1.0)
Registration LastPduOrigin
Disabled Normal
Disabled Normal
Description
Port list.
Trunk list.
The ports/trunks can be added to dynamic VLANs.
The port/trunk does not send GVRP packets, but can receive
GVRP packets. The ports/trunks cannot be added to dynamic
VLANs. VLAN attributes that have been learned cannot be
deregistered.
The ports/trunks does not send or receive GVRP packets. VLAN
attributes that have been learned can be deregistered.
00.00.00.00.00.00
00.00.00.00.00.00
4-429
Chapter 4 Service Configuration
ZTE Proprietary and Confidential