Set Ztp Hop - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Syntax
set ztp vlan <1-4094>
Parameter Description
Parameter
<1-4094>
Default
Topology collection is performed in VLAN 1.
Example
The following example specifies VLAN 100 to perform topology collection:
zte(cfg-group)#set ztp vlan 100

5.6.11 set ztp hop

Purpose
This command sets the range of topology collection (hop counts).
Command Mode
Cluster management configuration mode
Syntax
set ztp hop <1-128>
Parameter Description
Parameter
<1-128>
Guidelines
Topology collection messages are sent by the local switch. The forwarding hop will be
decremented by 1 when each device is passed.
Default
The topology collection range is 4.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
VLAN ID or VLAN name
Description
Topology collection range (hop counts)
5-44
ZTE Proprietary and Confidential