4.35.11 set mld snp query vlan enable/disable
Purpose
This command enables or disables the query function on the specified VLANs.
Command Mode
Global configuration mode
Syntax
set mld snooping query vlan <vlanlist>{enable | disable}
Parameters
Parameter
<vlanlist>
enable
disable
Default
The query function is disabled.
Example
The following example enables the query function on VLANs 1 to 10:
zte(cfg)#set mld snooping query vlan 1-10 enable
4.35.12 set mld snp query version
Purpose
This command sets the MLD version of the query messages sent by the switch.
Command Mode
Global configuration mode
Syntax
set mld snooping query vlan <vlanlist> version <1-2 >
Parameter Description
Parameter
<vlanlist>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
VLAN list.
Enables the query function.
Disables the query function.
Description
VLAN list. A VLAN list supports a maximum of 256 VLANs.
4-529
Chapter 4 Service Configuration
ZTE Proprietary and Confidential