Set Qos Traffic-Limit Ge-Port Data-Rate - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set qos traffic-limit fe-port <1-24>{packet-rate <0-148810>[packet-length <64-10240>]| di
sable}
Parameter Description
Parameter
<1-24>
<0-148810>
<64-10240>
disable
Guidelines
This command sets the ingress rate limit function in accordance with this formula: ingress
rate limit = number of packets * length of packets. The configuration is valid only in ingress
rate limit global byte mode.
Example
The following example sets the ingress rate limit to 100 pps and packet length to 64 bytes
for port 2:
zte(cfg)#set qos traffic-limit fe-port 2 packet-rate 100 packet-length 64

4.14.17 set qos traffic-limit ge-port data-rate

Purpose
This command sets the ingress rate limit for a GE port.
Command Mode
Global configuration mode
Syntax
set qos traffic-limit ge-port <25-28>{data-rate <0-1000000>| disable}
Parameter Description
Parameter
<25-28>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of an FE port. Different devices have different port
number ranges. In the syntax, the 2928E device is used as an
example.
Number of packets limited on the ingress port.
Length of packets limited on the ingress port.
Disables the port rate limit function.
Description
Number of a GE port. Different devices have different port number
ranges. In the syntax, the 2928E device is used as an example.
4-313
Chapter 4 Service Configuration
ZTE Proprietary and Confidential