Set Poe Port Protect-Time; Set Poe Port Recover - Zte ZXR10 2900E Series Command Reference Manual

4.3.13 set poe port protect-time

Purpose
This command sets the recovery time when the power of a PoE port exceeds the limit.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> protect-time <time>
Parameter Description
Parameter
<portlist>
<time>
Example
The following example sets the recovery time when the power of PoE port 1/1 exceeds the
limit to 5 minutes:
zte(cfg)#set poe port 1/1 protect-time 5

4.3.14 set poe port recover

Purpose
This command sets the recovery function after the power of a PoE port exceeds the limit.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> recover
Parameter Description
Parameter
<portlist>
Example
The following example sets the recovery function after the power of PoE port 1/1 exceeds
the limit:
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list. If this parameter is not specified, it means all ports.
Recovery time, unit: minutes.
Description
Port list. If this parameter is not specified, it means all ports.
4-71
Chapter 4 Service Configuration
ZTE Proprietary and Confidential