Set Qos Priority-Mapping Port Remark/Remapping - Zte ZXR10 2900E Series Command Reference Manual

Guidelines
When the port receives a message, it selects a profile to implement the
trust mode.
Example
The following example sets port 20 to trust port-profile:
zte(cfg)#set qos priority-mapping port 20 trust-mode port-profile

4.14.3 set qos priority-mapping port remark/remapping

Purpose
This command sets message UP/DSCP remark/remapping based on port.
Command Mode
Global configuration mode
Syntax
set qos priority-mapping port <1-28>{remapping-dscp | remark {dscp-priority | user-priorit
y}}{enable | disable}
Parameter Description
Parameter
<1-28>
remapping-dscp
remark
dscp-priority
user-priority
enable
disable
Default
Mapping/modification is disabled.
Example
The following example enables the DSCP mapping rule for port 2:
zte(cfg)#set qos priority-mapping port 2 remapping-dscp enable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
Sets whether DSCP mapping can be enabled/disabled.
Sets whether DSCP/UP modification can be enabled/disabled.
Configures a DSCP modification rule.
Configures an UP modification rule.
Enables mapping/modification.
Disables mapping/modification.
4-301
Chapter 4 Service Configuration
QoS
ZTE Proprietary and Confidential
service in