Set Anti-Dos; Show Qos Priority-Mapping Port - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
zte(cfg)#set qos traffic-shaping xge-port 2/1 queue 2 data-rate 2 burst-size 8

4.14.30 set anti-dos

Purpose
This command enables or disables the anti-DOS function.
Command Mode
Global configuration mode
Syntax
set anti-DoS {enable | disable}
Parameter Description
Parameter
enable
disable
Guidelines
When the anti-dos function is enabled, filter the Null Scan, SYN with sport<1024, Xmascan,
SYSFIN attacking messages.
Default
The anti-DOS function is disabled.
Example
The following example enables the anti-DOS function:
zte(cfg)#set anti-dos enable

4.14.31 show qos priority-mapping port

Purpose
This command shows the priority mapping configuration based on port.
Command Mode
All configuration modes
Syntax
show qos priority-mapping port [<1-28>]
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the anti-DOS function.
Disables the anti-DOS function.
4-324
ZTE Proprietary and Confidential