Set Group Candidate; Set Group Independent - Zte ZXR10 2900E Series Command Reference Manual

Guidelines
If this command is run on a switch, the switch is the commander. To delete a commander,
run the independent or candidate command.
Default
The default IP address pool is 192.168.1.1/24.
Example
The following example sets a commander switch, specifies the layer-3 port to ipport 63,
and sets the IP address pool to 10.40.89.100/24:
zte(cfg-group)#set group commander ipport 63 ip-pool 10.40.89.100/24

5.6.21 set group candidate

Purpose
This command sets the role of a switch as candidate.
Command Mode
Cluster management configuration mode
Syntax
set group candidate
Guidelines
This command can delete the commander. A candidate switch can be added as the
commander or a member machine.

5.6.22 set group independent

Purpose
This command sets the role of a switch as an independent switch.
Command Mode
Cluster management configuration mode
Syntax
set group independent
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
5-51
ZTE Proprietary and Confidential