Ping6 - Zte ZXR10 2900E Series Command Reference Manual

Command Mode
All configuration modes
Syntax
show ipv6port <0> nd
Parameter Description
Parameter
<0>
Examples
The following example shows neighbor information of an IPv6 device:
zte(cfg-router)#show ipv6port 0 nd
Ipv6Address
-------------------------------- ----------------- ----------
fe80::223:cdff:fe9c:e656
2001::23
2000::22

4.18.10 ping6

Purpose
This command detects network connectivity. The function of this command is the same as
that of the ping command in IPv4.
Command Mode
Global configuration mode
Syntax
ping6 <ipv6Addr>[<0-65535>[<48-1280>[<1-255>[<0-65535>]]]]
Parameter Description
Parameter
<ipv6Addr>
<0-65535>(first)
<48-1280>
<1-255>
<0-65535>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of an IPv6 layer-3 port. The current value is 0.
MacAddress
00.23.cd.9c.e6.56
00.23.cd.9c.e6.56
00.50.43.3c.3b.5d
Description
Destination IPv6 address, for example, ab:CD::12
Number of times that echo request messages are sent
Length of IP layer of a sent echo request message
TTL value of a sent echo request message
Time delay of waiting responses, in unit of seconds
4-373
Chapter 4 Service Configuration
State
stale
stale
reachable
ZTE Proprietary and Confidential