Show Igmp Filterreport Vlan - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Command Mode
All configuration modes
Syntax
show igmp filter report
Example
The following example shows the configuration of multicast filtering. The index is 1 and
the mask is 255.255.255.255, which means that only one group address can be filtered.
zte(cfg)#show igmp filter report
IGMP Filter: enabled
Index Type
----- -------- ---------------- ---------------- ---------------------
1 Groupip
2 Groupip

4.10.31 show igmp filterreport vlan

Purpose
This command shows the multicast group filtering configuration of the specified VLAN.
Command Mode
All configuration modes
Syntax
show igmp filter report vlan <vlanlist>
Parameter Description
Parameter
<vlanlist>
Example
The following example shows the multicast group filtering configuration of VLAN 1:
zte(cfg)#show igmp filter report vlan 1
Index FilterIpAddress
----- ---------------- ---------------- -----
1 225.0.0.10
2 225.0.0.1
SJ-20130731155059-003|2013-11-27 (R1.0)
IpAddress IpMask
225.0.0.1 255.255.255.255
225.0.0.10 255.255.255.0
Description
VLAN list.
FilterIpMask
255.255.255.0
255.255.255.255
4-150
VlanList
1-10
1-10
Vlan Type
--------
1 Groupip
1 Groupip
ZTE Proprietary and Confidential