Set Auto-Saveconfig Period - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<A.B.C.D>
Guidelines
Run this command before the set auto-saveconfig enable command.
Default
The default IP address of the TFTP server is 0.0.0.0.

3.13.3 set auto-saveconfig period

Purpose
This command configures the interval (in days) that the switch automatically uploads
configuration files.
Command Mode
Global configuration mode
Syntax
set auto-saveconfig period <1-30>
Parameter Description
Parameter
<1-30>
Guidelines
A day starts from 00:00:00.
Default
The default period is seven days.
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 3 File System Configuration
Description
TFTP server IP address. If the IP address cannot be pinged
successfully, the automatic upload of configuration files fails, and
the files cannot be uploaded again until the number of days set in
set auto-saveconfig period is 0.
Description
Period (natural days) that the switch automatically uploads
configuration files.
3-13
ZTE Proprietary and Confidential