Set Poe Port Pd-Max-Power - Zte ZXR10 2900E Series Command Reference Manual

Guidelines
If the POE function is enabled, power supply is provided for ports in accordance with port
priorities (including critical, high, and low). If port priorities are the same, power supply
is provided from the port with the smallest port number to the port with the largest port
number. If the POE function is disabled, power is removed from the port with the smallest
port number to the port with the largest port number.
Default
The POE function is disabled.
Example
The following example enables the POE function for ports 1, 3, and 5:
zte(cfg)#set poe port 1/1,1/3,1/5 enable

4.3.2 set poe port pd-max-power

Purpose
This command sets the maximum power of ports.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> pd-max-power {15.4 | 4.0 | 7.0 | ext.18 | ext.27 | ext.30}
Parameter Description
Parameter
<portlist>
15.4 | 4.0 | 7.0
ext.18 | ext.27 | ext.30
Guidelines
If the maximum power of a port is configured and the PD power connected to the port is
larger than the value configured, power supply to the port may be affected.
Default
Standard power (30 W).
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Standard power in Watts
Extended power in Watts
4-63
Chapter 4 Service Configuration
ZTE Proprietary and Confidential