Set Lacp Port Mode; Set Lacp Port Timeout - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

4.9.5 set lacp port mode

Purpose
This command sets the mode of ports to be aggregated.
Command Mode
Global configuration mode
Syntax
set lacp port <portlist> mode {active | passive}
Parameter Description
Parameter
<portlist>
active
passive
Guidelines
If the aggregation mode is dynamic, the aggregation can be successful only when at least
one end of the links is active. If neither of the ends are active, the aggregation fails. To
modify the aggregation mode of a port, add the port to a LACP aggregation group first.
Default
Active negotiation mode.

4.9.6 set lacp port timeout

Purpose
This command sets timeout processing for the ports to be aggregated.
Command Mode
Global configuration mode
Syntax
set lacp port <portlist> timeout {long | short}
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Active negotiation mode of LACP ports
Passive negotiation mode of LACP ports
4-124
ZTE Proprietary and Confidential