Zte ZXR10 ZSR Hardware Manual
  1. Manuals
  2. Brands
  3. Zte Manuals
  4. Network Router
  5. ZXR10 ZSR
  6. Hardware manual
Zte ZXR10 ZSR Hardware Manual

Zte ZXR10 ZSR Hardware Manual

Intelligent integrated multi-service router
Hide thumbs Also See for ZXR10 ZSR:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, Product Description
ZXR10 ZSR
Intelligent Integrated Multi-Service Router
Hardware Manual
Version: V2.8.11
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn

Advertisement

Table of Contents
loading

Related Manuals for Zte ZXR10 ZSR

Summary of Contents for Zte ZXR10 ZSR

  • Page 1 ZXR10 ZSR Intelligent Integrated Multi-Service Router Hardware Manual Version: V2.8.11 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://ensupport.zte.com.cn E-mail: support@zte.com.cn...
  • Page 2 ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners.

  • Page 3: Table Of Contents

    Contents About This Manual ..................I Chapter 1 Safety Description ..............1-1 1.1 Safety Introduction ..................... 1-1 1.2 Safety Description ....................1-1 Chapter 2 Introduction to the System ............2-1 2.1 Product Overview....................2-1 2.2 Functions......................2-4 2.3 Technical Features and Parameters..............2-5 Chapter 3 Structure and Principle ............
  • Page 4 3.4.18 RA-8AS ....................3-31 3.4.19 RA-NDEC .................... 3-32 3.4.20 RA-1ADSL ................... 3-33 3.4.21 RA-5FE-1SFP4RJ ................3-34 Figures......................I Tables ......................III...

  • Page 5: About This Manual

    About This Manual Purpose At first, thank you for choosing ZXR10 routers of ZTE Corporation! This manual provides procedures and guidelines that support the operation of ZXR10 ZSR (V2.8.11) Intelligent Integrated Multi-Service Router. Intended Audience This manual is intended for the following engineers:...
  • Page 6 Typeface Meaning Danger: Indicates an imminently hazardous situation, which if not avoided, will result in death or serious injury. Warning: Indicates a hazard that, if not avoided, could result in serious injuries, equipment damages or interruptions of major services. Caution: Indicates a potential hazard that, if not avoided, could result in moderate injuries, equipment damages or partial service interruption.

  • Page 7: Chapter 1 Safety Description

    ZTE bears no responsibility in case of universal safety operation requirements violation and safety standards violation in designing, manufacturing and equipment usage. 1.2 Safety Description Contents deserving special attention during configuration of ZXR10 ZSR are explained in the following table. Table 1-1 SAFETY DESCRIPTION Convention...
  • Page 8 ZXR10 ZSR Hardware Manual This page intentionally left blank. SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 9: Chapter 2 Introduction To The System

    QOS, IPv6, broadcast band. All above services need to optimize in order to meet the requirements of enterprise core environment. Facing the access layer of enterprise and carrier networks, ZXR10 ZSR separates the main processor baseboard, processor sub-card and line interface module completely for realizing the real modular structure to satisfy various customer requirements.

  • Page 10: Figure 2-1 Front Panel Of Zxr10 Zsr With 3U

    RA-3844-AC RA-3844-DC RA-3884-AC RA-3884-DC The front panel of ZXR10 ZSR with 3U chassis structure is shown in Figure 2-1. Figure 2-1 FRONT PANEL OF ZXR10 ZSR WITH 3U The front panel of ZXR10 ZSR with 2U chassis structure is shown in Figure 2-2.

  • Page 11: Figure 2-4 Front Panel Of Zxr10 Zsrsoho

    Chapter 2 Introduction to the System Figure 2-4 FRONT PANEL OF ZXR10 ZSRSOHO The rear panel of ZXR10 ZSR with 3U chassis structure and the AC power is shown in Figure 2-5. Figure 2-5 REAR PANEL OF ZXR10 ZSR WITH 3U AND AC...

  • Page 12: Functions

    ZXR10 ZSR Hardware Manual Figure 2-8 REAR PANEL OF ZXR10 ZSR WITH 2U AND DC The rear panel of ZXR10 ZSR with 1U chassis structure and the AC power is shown in Figure 2-9. Figure 2-9 REAR PANEL OF ZXR10 ZSR WITH 1U AND AC...

  • Page 13: Technical Features And Parameters

    8–port channelized E1 Interface board With respect to software, a network operation system (ROS) platform, of which the self-proprietary rights are completely owned by ZTE, is used for ZXR10 ZSR. It has powerful protocol support functions, supporting the following network protocols and standards.

  • Page 14: Table 2-3 Ra-1822-Ac System Features

    ZXR10 ZSR Hardware Manual Item Feature Basic interface configuration 1CON, 1GE, 8FE Dimensions (W×D×H) 180mm×330mm×43.6mm Power supply AC: 100V~240V, 60Hz/50Hz -5 ℃~45 ℃ Ambient temperature Environment humidity 20%~90% (non-condensing) RA-1822-AC system features are listed in Table 2-3. Table 2-3 RA-1822-AC SYSTEM FEATURES...

  • Page 15: Table 2-5 Ra-1842-Ac System Features

    Table 2-6 RA-1842-DC SYSTEM FEATURES Item Feature Processor specification 400MHz SDRAM configuration 256M/2G FLASH configuration BOOT ROM Bus bandwidth 11Gbps Number of routings 128K/1M Number of available slots Basic interface configuration 1AUX, 1CON, 2GE SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 16: Table 2-7 Ra-2842-Ac System Features

    ZXR10 ZSR Hardware Manual Item Feature Dimensions (W×D×H) 442mm×420mm×86.1mm Power supply DC: –48V Ambient temperature -5℃~45℃ Environment humidity 20%~90% (non-condensing) RA-2842-AC system features are listed in Table 2-7. Table 2-7 RA-2842-AC SYSTEM FEATURES Item Feature Processor specification 533MHz SDRAM configuration...

  • Page 17: Table 2-9 Ra-3844-Ac System Features

    Table 2-10 RA-3844-DC SYSTEM FEATURES Item Feature Processor specification 1GHz SDRAM configuration 256M/2G FLASH configuration BOOT ROM Bus bandwidth 11Gbps Number of routings 128K/1M Number of available slots Basic interface configuration 1AUX, 1CON, 2FE, 2GE SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 18: Table 2-11 Ra-3884-Ac System Features

    ZXR10 ZSR Hardware Manual Item Feature Dimensions (W×D×H) 442mm×420mm×86.1mm Power supply DC: –48V Ambient temperature -5℃~45℃ Environment humidity 20%~90% (non-condensing) RA-3884-AC system features are listed in Table 2-11. Table 2-11 RA-3884-AC SYSTEM FEATURES Item Feature Processor specification 1GHz SDRAM configuration...
  • Page 19 Chapter 2 Introduction to the System Item Feature Dimensions (W×D×H) 442mm×420mm×130.5mm Power supply DC: –48V Ambient temperature -5℃~45℃ Environment humidity 20%~90% (non-condensing) 2-11 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...
  • Page 20 ZXR10 ZSR Hardware Manual This page intentionally left blank. 2-12 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 21: Chapter 3 Structure And Principle

    ZXR10 ZSR applies module design architecture, the whole system is combined with main CPU board, back plate, interface board. It can satisfy various application requirements by carrying out different CPU board. The structure diagram of ZXR10 ZSR is shown in Figure 3-1.

  • Page 22: Working Principle

    System bridge module Line interface module Power supply module ZXR10 ZSR adopts 180W power supply. The power supply module supplies power for other modules of the system in the modes of -48V, +3.3V, +5V and +12V. Main processing module As core part of ZXR10 ZSR main processing module has four main functions: It processes routing packets and implements network routing convergency.

  • Page 23: Main Board

    Chapter 3 Structure and Principle Low-speed/hign speed Interface Module Line interface module is the external interface of ZXR10 ZSR. Its interface sub-unit is connected with high-speed network processing main board through standard industrial bus. It provides the following functions: In receiving direction, it transfers the physical line signals to the data frames of link layer, and envelops the data packets transmitted from the CPU sub-system module.

  • Page 24: Table 3-2 Features Of Fast Ethernet Management Port

    In compliance with IEEE 802.3u RJ45 connector 1000Base-TX Using category-5 Unshielded Twisted Pairs (UTP) Maximum transmission distance: 100m Indicators There are two indicators on the ZXR10 ZSR 1809 panel, as shown in Table 3-3. SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 25: Zxr10 1822E Panel

    RJ45. The cable sequence is shown in Table 3-4. MODEM is connected at AUX port, the cable sequence is shown in Table 3-5. Table 3-4 SEQUENCE OF CONSOLE CABLE DB9 of Background RJ45 Signal Computer Signal Not used SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 26: Table 3-5 Sequence Of Aux Cable

    ZXR10 ZSR Hardware Manual DB9 of Background RJ45 Signal Computer Signal Not used Not used Not used Not used Not used Table 3-5 SEQUENCE OF AUX CABLE DB9 of Background RJ45 Signal Computer Signal 10/100/1000Base-TX Ethernet port 10/100Base-TX Ethernet management port can either be used for out-band NM of the router, or work as common service ports.

  • Page 27: Table 3-6 Features Of Fast Ethernet Management Port

    The two indicators aren't on when interfaces module doesn't exist. When green is on, it indicates that the fan is working normally. FAN indicator (red and green) Otherwise the red is on. SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 28: Zxr10 1842/2800/3800 Panel

    ZXR10 ZSR Hardware Manual 3.3.3 ZXR10 1842/2800/3800 Panel ZXR10 1842/2800/3800 router must configure system bridge module. This module and interface module provides two kinds of boards: MBCA and MBCB. Each type of administration interface is different and is configured according to customers' requirements.

  • Page 29: Table 3-9 Sequence Of Aux Cable

    RJ45 connector 10Base-T Using category-3, 4 and 5 Unshielded Twisted Pairs (UTP) Maximum transmission distance: 100m In compliance with IEEE 802.3u RJ45 connector 100Base-TX Using category-5 Unshielded Twisted Pairs (UTP) Maximum transmission distance: 100m SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 30: Table 3-11 Features Of Fast Ethernet Management Port

    ZXR10 ZSR Hardware Manual 10/100/1000BASE-TX/1000BASE-X optical-electrical adaptive ports 10/100/1000BASE-TX/1000BASE-X supports optical-electrical adaptive. Electrical and optical port can switch according to connection status and system configuration. Electrical port supports 10BASE-T/100BASE-TX/1000BASE-T adaptive. Optical port uses SFP module and provides 1000BASE-SX1000BASE-LX1000BASE-ZX optical modules according to users' demand.

  • Page 31: Line Interface Board

    When green is on, it indicates that the fan is working normally. FAN indicator (red and green) Otherwise the red is on. 3.4 Line Interface Board The detailed list of ZXR10 ZSR line Interface board boards is shown in Table 3-13. Table 3-13 ZXR10 ZSR Line Interface Board List...

  • Page 32: Ra-1Ce1

    Hardware encryption board RA-MNDEC Hardware encryption board Line interface board of ZXR10 ZSR provides multiple types of port connectors that can be used for different transmission medium and distance. Detailed descriptions about these boards are given in the alphabetical order.

  • Page 33: Figure 3-7 Ra-1Ce1 Board Panel

    Table 3-16 INTERCONNECTION OF RJ48 CONNECTORS AT E1 PORT RJ48 of GAR CE1 E1 RJ48 Connector of Board Signal Mating Device Signal RX_RING TX_RING RX_TIP TX_TIP Not connected Not connected TX_RING RX_RING TX_TIP RX_TIP Not connected Not connected 3-13 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 34: Ra-1Ce1-75

    ZXR10 ZSR Hardware Manual RJ48 of GAR CE1 E1 RJ48 Connector of Board Signal Mating Device Signal Not connected Not connected Not connected Not connected As shown in Table 3-16, when two routers are connected through E1 RJ48 connectors, special crossover cables of 1 and 4 or 2 and 5 are used for connection. The connection...

  • Page 35: Ra-1Cp3-Sfp

    RA-1CP3-SFP (1-port channelized POS3 optical interface board) provides POS 155M uplink interface module and downlink user module. Panel Panel of RA-1CP3-SFP is shown in Figure 3-11. Figure 3-11 Panel of RA-1CP3-SFP Interface Features of interface on RA-1CP3-SFP are shown in Table 3-19. 3-15 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 36: Ra-1Ge-E1000Rj

    ZXR10 ZSR Hardware Manual Table 3-19 Features of interface on RA-1CP3-SFP Port Type Specifications connectors, single/multiple mode fiber, transmission distance 2km to 80km, depending on the selected optical module Indicators There are two indicators on the top of interfaces on RA-1CP3-75 board. Their functions...

  • Page 37: Ra-1Ge-Sfp

    Table 3-23 FEATURES OF INTERFACES ON RA-1GE-SFP BOARD Port Type Specifications Double LC optical interface In compliance with SFP MSA and SFF-8472 recommendations Metal encapsulation , good EMI and EMC performance Working speed: Gigabit Ethernet Transmission distance : 2km,15km,40km,80km,100km,120km 3-17 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 38: Ra-1P3-M02Ksc

    ZXR10 ZSR Hardware Manual Indicators There are two indicators on the top of interfaces on RA-1GE-SFP board. Their functions are listed in Table 3-24. Table 3-24 DESCRIPTION OF INDICATORS ON RA-1GE-SFP BOARD Indicator Functions Green indicator indicates normal running of the port and flashing...

  • Page 39: Ra-1P3-S15Ksc

    On indicates the physical line is normal 3.4.8 RA-1P3-S40KSC RA-1P3-S40KSC (1-port POS3 optical interface board) provides POS 155M uplink interface module and downlink user module. Panel Panel of RA-1P3-S40KSC is shown in Figure 3-16. 3-19 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 40: Ra-2Ce1

    ZXR10 ZSR Hardware Manual Figure 3-16 PANEL OF RA-1P3-S40KSC BOARD Interface Features of interfaces on RA-1P3-S40KSC are shown in Table 3-29. Table 3-29 FEATURES OF INTERFACES ON RA-1P3-S40KSC BOARD Port Type Specifications SC connector, single-mode fiber, with the wavelength of 1310nm...

  • Page 41: Table 3-31 Features Of Interfaces On Ra-2Ce1 Board

    3-33, when two routers are connected through E1 RJ48 connectors, special crossover cables of 1 and 4 or 2 and 5 in the mode of interchange are used for connection. Its connection method is displayed in Figure 3-18. 3-21 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 42: Ra-2Ce1-75

    ZXR10 ZSR Hardware Manual Figure 3-18 INTERCONNECTION OF E1 RJ48 CONNECTORS In the case of interconnection of E1 RJ48 connector with E1 BNC connector, a connector converter is needed to convert RJ48 to BNC connector. E1 RJ48 connector is connected with the RJ48/BNC converter by an E1 crossover cable and the E1 BNC connector connected with the converter by a coaxial cable.

  • Page 43: Ra-2Fe-E100Rj

    Table 3-36 FEATURES OF INTERFACES ON RA-2FE-R100RJ BOARD Port Type Specifications In compliance with IEEE 802. 3 RJ45 connector 10Base-T Using category-3, 4 and 5 Unshielded Twisted Pairs (UTP) Maximum transmission distance: 100 m 3-23 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 44: Ra-4Ce1

    ZXR10 ZSR Hardware Manual Port Type Specifications In compliance with IEEE 802. 3 RJ45 connector 100Base-TX Using category- 5 Unshielded Twisted Pairs (UTP) Maximum transmission distance: 100 m Tip: When 10Base-T /100Base-TX port is interconnected with a hub, switch or router, a crossover cable should be used;...

  • Page 45: Table 3-38 Features Of Interfaces On Ra-4Ce1 Board

    When two routers are connected by E1 RJ48 connectors, special crossover cables of 1 and 4 or 2 and 5 in the mode of interchange are used for connection. Its connection method is displayed in Figure 3-23. 3-25 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 46: Ra-4Ce1-75

    ZXR10 ZSR Hardware Manual Figure 3-23 INTERCONNECTION OF E1 RJ48 CONNECTORS In the case of interconnection of E1 RJ48 connector with E1 BNC connector, a connector converter is needed to convert RJ48 to BNC connector. The E1 RJ48 connector is connected with the RJ48/BNC converter by an E1 crossover cable and the E1 BNC connector connected with the converter by a coaxial cable.

  • Page 47: Ra-4Fe

    Features of interfaces on RA-4FE are shown in Table 3-43. Table 3-43 FEATURES OF INTERFACES ON RA-4FE BOARD Port Type Specifications RJ45 connector 10Base-T Using category-3, 4 and 5 Unshielded Twisted Pairs (UTP) Maximum transmission distance: 100 m 3-27 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 48: Ra-8Ce1

    ZXR10 ZSR Hardware Manual Port Type Specifications In compliance with IEEE 802. 3u RJ45 connector 100Base-TX Using category-5 unshielded twist pair Maximum transmission distance: 100 M Indicators There are two indicators on each interface of RA-4FE board. Their functions are listed in Table 3-44.

  • Page 49: Ra-8Ct1

    Each port is configured in channelized mode or unchannelized mode. Panel Panel of RA-8CT1 board is shown in Figure 3-28. Figure 3-28 RA-8CT1 BOARD PANEL Interface Interface features of RA-8CT1 board is shown in Table 3-47. 3-29 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 50: Ra-8Fe-M

    Indicator on each port (green) On indicates the physical line is normal 3.4.17 RA-8FE-M RA-8FE-M board is only used in ZXR10 ZSR router. RA-8FE-M (8-ports L2/L3 fast Ethernet electrical interface board) provides fast Ethernet uplink interface module and downlink user module.

  • Page 51: Ra-8As

    RA-8FE-R can not be used in ZXR10 ZSR 1842R/2842R/2882R. If the interface board is used in ZXR10 ZSR 1822 and ZXR10 ZSR 1822E, the slot No. 2 must be used. If there is only one interface card, it must be inserted in slot No. 2.

  • Page 52: Ra-Ndec

    ZXR10 ZSR Hardware Manual Table 3-51 INTERFACE FEATURES OF RA-8AS BOARD Port Type Specifications In compliance with V.24 SCSI 68 connector asynchronous serial interface The length of WAN is not exceed 3m DTE DCE software optional Indicators There are two indicators on each interface of RA-8AS board. Their functions are listed in Table 3-52.

  • Page 53: Ra-1Adsl

    Table 3-55 DESCRIPTION OF INDICATORS ON RA-NDEC BOARD Indicator Functions Green indicator indicates normal running of the Upper indicator port Line status indicator: On indicates the line and Lower indicator line signals are normal 3-33 SJ-20110803091932-001|2011-12-15 (R2.0) ZTE Proprietary and Confidential...

  • Page 54: Ra-5Fe-1Sfp4Rj

    ZXR10 ZSR Hardware Manual 3.4.21 RA-5FE-1SFP4RJ RA-5FE-1SFP4RJ boards (5-port fast Ethernet interface boards) provide fast Ethernet uplink interface modules and downlink user modules. Each interface board has five 10Base-T/100Base-TX adaptive ports. Panel The panel of an RA-5FE-1SFP4RJ board is shown in Figure 3-33.

  • Page 55: Figures

    Figure 2-3 FRONT PANEL OF ZXR10 ZSR WITH 1U..........2-2 Figure 2-4 FRONT PANEL OF ZXR10 ZSRSOHO............ 2-3 Figure 2-5 REAR PANEL OF ZXR10 ZSR WITH 3U AND AC ........2-3 Figure 2-6 REAR PANEL OF ZXR10 ZSR WITH 3U AND DC........2-3 Figure 2-7 REAR PANEL OF ZXR10 ZSR WITH 2U AND AC ........
  • Page 56 ZXR10 ZSR Hardware Manual Figure 3-20 RA-2CE1-75 BOARD PANEL............... 3-22 Figure 3-21 RA-2FE-R100RJ BOARD PANEL ............3-23 Figure 3-22 RA-4CE1 BOARD PANEL..............3-24 Figure 3-23 INTERCONNECTION OF E1 RJ48 CONNECTORS ......3-26 Figure 3-24 INTERCONNECTION OF E1 JR48 AND E1 BNC CONNECTORS ..................
  • Page 57 Table 3-12 FUNCTION DESCRIPTION OF INDICATORS ON THE FRONT PANEL OF ZXR10 1842/2800/3800 ..............3-11 Table 3-13 ZXR10 ZSR Line Interface Board List ............ 3-11 Table 3-14 FEATURES OF INTERFACES ON RA-1CE1 BOARD ......3-13 Table 3-15 DESCRIPTION OF INDICATORS ON THE RA-1CE1 BOARD ....3-13 Table 3-16 INTERCONNECTION OF RJ48 CONNECTORS AT E1 PORT .....
  • Page 58 ZXR10 ZSR Hardware Manual Table 3-18 FUNCTIONS DESCRIPTIONS OF CHANNELIZED RA-1CE1-75 BOARD INDICATORS................3-15 Table 3-19 Features of interface on RA-1CP3-SFP ..........3-16 Table 3-20 FUNCTIONS DESCRIPTIONS OF CHANNELIZED RA-1CP3-SFP BOARD INDICATORS................3-16 Table 3-21 FEATURES OF INTERFACES ON RA-1GE-E1000RJ BOARD ..... 3-16...
  • Page 59 Tables Table 3-50 DESCRIPTION OF INDICATORS ON RA-8FE-M BOARD..... 3-31 Table 3-51 INTERFACE FEATURES OF RA-8AS BOARD........3-32 Table 3-52 DESCRIPTION OF INDICATORS ON RA-8FXS BOARD ...... 3-32 Table 3-53 ZXR10 Dual-serial External Cables ............3-32 Table 3-54 DESCRIPTION OF INDICATORS ON RA-NDEC BOARD ..... 3-33 Table 3-55 DESCRIPTION OF INDICATORS ON RA-NDEC BOARD .....

Table of Contents