Set Igmp Snooping Add/Delete Maxnum Vlan/Port; Set Igmp Snooping Delete Host - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

4.10.3 set igmp snooping add/delete maxnum vlan/port

Purpose
This command sets or deletes the maximum number of multicast groups on the specified
VLANs/ports.
Command Mode
Global configuration mode
Syntax
set igmp snooping {add | delete} maxnum <1-1024>{vlan <vlanlist>| port <portlist>[replace]}
Parameters
Parameter
<1-1024>
<vlanlist>
<portlist>
replace
Example
The following example sets the maximum number of multicast groups for VLANs 1 to 10
and ports 1 to 10 to 100:
zte(cfg)#set igmp snooping add maxnum 100 vlan 1-10
zte(cfg)#set igmp snooping add maxnum 100 port 1-10

4.10.4 set igmp snooping delete host

Purpose
This command clears dynamic users.
Command Mode
Global configuration mode
Syntax
set igmp snooping delete host
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Maximum number of multicast groups.
VLAN list.
Port list.
If the number of users using the port reaches the maximum limit
and the port receives one more report packet, the multicast group
sending the latest report packet will replace the multicast group
that does not respond to the query message for the longest time.
4-132
ZTE Proprietary and Confidential