4.11.54 show iptv duplicate
Purpose
This command shows the duplicate rule configuration.
Command Mode
All configuration modes
Syntax
show iptv duplicate
Example
The following example shows the duplicate rule configuration:
zte(cfg-nas)#show iptv duplicate
Index
-----
0
4.12 STP Configuration
4.12.1 set stp enable/disable
Purpose
This command enables or disables the Spanning Tree Protocol (STP).
Command Mode
Global configuration mode
Command Mode
set stp {enable | disable}
Parameter Description
Parameter
enable
disable
Guidelines
By default, the Multiple Spanning Tree Protocol (MSTP) is enabled.
SJ-20130731155059-003|2013-11-27 (R1.0)
Port
Mvlan
Uvlan
----
-----
-----
2
4000
1
Description
Enables the STP.
Disables the STP.
4-193
Chapter 4 Service Configuration
ZTE Proprietary and Confidential