Set Mac Logging-Alarm; Set Mac Logging-Alarm Interval - Zte ZXR10 2900E Series Command Reference Manual

static addresses. When the transformation is completed, the later learned MAC addresses
are dynamic MAC addresses.

4.7.22 set mac logging-alarm

Purpose
This command enables or disables the MAC event alarm function.
Command Mode
Global configuration mode
Syntax
set mac logging-alarm {station-move | threshold-state}{enable | disable}
Parameter Description
Parameter
station-move
threshold-state
enable
disable
Default
The drift alarm switch is disabled.
The threshold alarm switch is enabled.
Example
The following example enables the MAC event alarm function:
zte(cfg)#set mac logging-alarm station-move enable

4.7.23 set mac logging-alarm interval

Purpose
This command sets the interval for MAC event alarm output.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
MAC drift alarm switch.
Threshold alarm switch used to remind that the number of MAC
addresses is about to reach the threshold.
Enables the alarm switch.
Disables the alarm switch.
4-105
Chapter 4 Service Configuration
ZTE Proprietary and Confidential