Config Egress-Acl Extend; Egress-Acl Extend Rule Type-Ip-Protocol - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

4.13.48 config egress-acl extend

Purpose
This command creates extended egress ACL instance and configures it.
Command Mode
Global configuration mode
Syntax
config egress-acl extend number <500-599>
Parameter Description
Parameter
<500-599>

4.13.49 egress-acl extend rule type-ip-protocol

Purpose
This command sets the rule that the extended egress ACL matches IPv4 specified protocol
field.
Command Mode
Extended egress ACL configuration mode
Syntax
rule <1-500>{permit | deny}<ip-protocol>{<source-ipaddr><sip-mask>| any}{<destination-ipad
dr><dip-mask>| any}[dscp <0-63>][fragment]
Parameter Description
Parameter
<1-500>
permit
deny
<ip-protocol>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of the extended egress ACL instance
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for messages with the specified IP protocol
field. Ignore this rule for other messages. The range of IP protocol
field value is 0 to 255.
4-260
ZTE Proprietary and Confidential