Clear Remote-Access All; Clear Remote-Access Ipaddress - Zte ZXR10 2900E Series Command Reference Manual

Default
Access is permitted.
Example
The following example allows the IP address 192.168.0.1 to access the switch through
SSH and denies the access through Telnet:
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.0.1 255.255.255.0
zte(cfg)#set remote-access ipaddress 192.168.0.1 255.255.255.0 ssh permit
zte(cfg)#set remote-access ipaddress 192.168.0.1 255.255.255.0 telnet deny

5.1.3 clear remote-access all

Purpose
This command deletes the configuration of all IP addresses.
Command Mode
Global configuration mode
Syntax
clear remote-access all
Example
The following example deletes the configuration of all IP addresses:
zte(cfg)#clear remote-access all

5.1.4 clear remote-access ipaddress

Purpose
This command deletes the configuration of the specified IP address and network segment.
Command Mode
Global configuration mode
Syntax
clear remote-access ipaddress <A.B.C.D>[<A.B.C.D>]
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
5-3
ZTE Proprietary and Confidential