Show Igmp Snooping - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameters
Parameter
add
delete
<portlist>
<trunklist>
<vlanlist>
Example
The following example shows how to filter query packets for port 1 and VLAN 1:
zte(cfg)#set igmp filter add query port 1 vlan 1

4.10.26 show igmp snooping

Purpose
This command shows the global configuration of IGMP snooping.
Command Mode
All configuration modes
Syntax
show igmp snooping
Example
The following example shows the global configuration of IGMP snooping.
zte(cfg)#show igmp snooping
IGMP snooping: disabled
FastLeave
QueryInterval: 1250
CrossVlan snooping: disabled
ResponseQueryInterval
LastMemberQueryInterval: 10
Snooping VlanId: none
Querying VlanId: none
IGMPv3 Snooping: disabled
Proxy Version: auto
Query Version: v2
Private Group: disable
Private Group Ip: none
Monitor Ring: disable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Adds the filtering of query packets.
Deletes the filtering of query packets.
List of physical ports to be filtered.
List of trunk ports to be filtered.
VLAN list.
: disabled
: 100
4-146
RouterTimeout: 2600
HostTimeout : 2600
ZTE Proprietary and Confidential