Show Dhcp Option82 Device; Set Dhcp Client Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

Remote-ID
Value
01234567890123456789012345678901234567890123456789012345678
Subscriber-ID: Disabled
Reserve
Option82 mode: Default
Port 1/2:
DHCP option82 is disabled on port 1/2.

4.25.20 show dhcp option82 device

Purpose
This command shows device information, including ANI and remote-ID.
Command Mode
All configuration modes
Syntax
show dhcp option82 device
Example
The following example shows the current device information:
zte(cfg)#show dhcp option82 device
DHCP option82 sub-option information on device:
Access-Node-Identifier: -
Remote-ID: Cisco

4.25.21 set dhcp client enable/disable

Purpose
This command enables or disables the DHCP client function.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
: Enabled Format: Manual
: 123456789012345678901234567890123456789012345678901234567890123456789
: Disabled
4-443
Chapter 4 Service Configuration
ZTE Proprietary and Confidential