Set Poe Port Priority; Set Poe Port Forcepower - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Example
The following example sets the maximum power of ports 1, 3 and 5 to 30 W.
zte(cfg)#set poe port 1/1,1/3,1/5 pd-max-power ext.30

4.3.3 set poe port priority

Purpose
This command sets POE priorities for ports.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> priority {critical | high | low}
Parameter Description
Parameter
<portlist>
critical
high
low
Guidelines
Priorities include critical, high, and low (from high to low). If port priorities are the same,
the port with the smallest port number has the highest priority. The total power of the ports
whose priority is critical cannot exceed the total power of the device.
Default
The low priority is selected.
Example
The following example sets the priority of ports 1, 3 and 5 to critical:
zte(cfg)#set poe port 1/1,1/3,1/5 priority critical

4.3.4 set poe port forcepower

Purpose
This command enables or disables the forced power-on function for ports.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Highest priority
High priority
Low priority
4-64
ZTE Proprietary and Confidential