ZXR10 2900E Series Command Reference
Parameter
disable
Default
The cross-device loop detection is disabled on ports.
4.37.7 set loopdetect trunk
Purpose
This command enables or disables loop detection on aggregation ports.
Command Mode
Global configuration mode
Syntax
set loopdetect trunk <trunklist>{enable|disable}
Parameter Description
Parameter
<trunklist>
enable
disable
Guidelines
The set loopdetect trunk command with enable is used to enable loop detection on
aggregation ports, that is, detect whether there is a loop on the PVID for the aggregation
ports. The set loopdetect trunk command with disable is used to disable loop detection
on the aggregation ports, that is, disable loop detection on PVID and user-defined VLAN
IDs for the aggregation ports.
4.37.8 set loopdetect trunk vlan
Purpose
This command enables or disables loop detection on the specified VLANs for the
aggregation ports.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Disables the cross-device loop detection on ports.
Description
Trunk port list.
Enables PVID loop detection on the aggregation ports.
Disables loop detection on all VLANs of the aggregation ports.
4-542
ZTE Proprietary and Confidential