Set Qos Traffic-Shaping Ge-Port Queue Data-Rate - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<25-28>
data-rate
<2-1000>
burst-size
<8-4094>
disable
Default
The egress shaping function is disabled.
Example
The following example sets the egress shaping limit to 2 Mbps and burst size to 32 KBytes
for port 25:
zte(cfg)#set qos traffic-shaping ge-port 25 data-rate 2 burst-size 8

4.14.27 set qos traffic-shaping ge-port queue data-rate

Purpose
This command sets the egress shaping rate for a GE port based on queue.
Command Mode
Global configuration mode
Syntax
set qos traffic-shaping ge-port <25-28> queue <0-7>{data-rate <2-1000> burst-size <8-40
94>| disable}
Parameter Description
Parameter
<25-28>
<0-7>
data-rate
<2-1000>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of a GE port. Different devices have different port number
ranges. In the syntax, the 2928E device is used as an example.
Egress shaping rate.
Shaping rate limit. The granularity is 2 Mbps.
Burst rate.
Burst rate value. The granularity is 4 KB.
Disables the egress shaping function.
Description
Number of a GE port. Different devices have different port number
ranges. In the syntax, the 2928E device is used as an example.
Queue number.
Queue egress shaping rate.
Shaping rate value. The granularity is 2 Mbps.
4-321
Chapter 4 Service Configuration
ZTE Proprietary and Confidential