ZXR10 2900E Series Command Reference
Syntax
set dhcp client {enable | disable}
Parameter Description
Parameter
enable
disable
Default
The DHCP client function is disabled.
4.25.22 set dhcp client broadcast-flag enable/disable
Purpose
This command sets whether the DHCP server takes a broadcast procedure when replying
to a packet.
Command Mode
Global configuration mode
Syntax
set dhcp client broadcast-flag {enable | disable}
Parameter Description
Parameter
enable
disable
Default
The DHCP server does not take a broadcast procedure when replying to a packet.
4.25.23 show dhcp client
Purpose
This command shows the configuration of the DHCP client.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the DHCP client function. Layer-3 ports can apply for IP
addresses automatically.
Disables the DHCP client function.
Description
The DHCP server takes a broadcast procedure when replying
to a packet.
The DHCP server does not take a broadcast procedure when
replying to a packet.
4-444
ZTE Proprietary and Confidential