Set Mirror Session Delete Source-Port - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<1-3>
<1-28>
ingress
egress
rspan
Example
The following example sets the ingress mirroring port 1:
zte(cfg)#set mirror session 1 add dest-port 1 ingress

4.4.3 set mirror session delete source-port

Purpose
This command deletes ingress/egress mirroring source ports in accordance with a session:
Command Mode
Global configuration mode
Syntax
set mirror session <1-3> delete source-port <portlist>{ingress | egress}
Parameter Description
Parameter
<1-3>
<portlist>
ingress
egress
Example
The following example deletes the ingress mirroring source ports 1, 5, 6, 7 and 12:
zte(cfg)#set mirror session 1 delete source-port 1,5-7,12 ingress
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Mirror function session number. Three sessions can be supported.
Port number. Port ranges vary with different device models.
Ingress mirroring port. In a session, the egress mirroring port and
ingress mirroring port can be different mirroring ports.
Egress mirroring port. In a session, the egress mirroring port and
ingress mirroring port can be different mirroring ports.
Enables the RSPAN function for the mirroring ports. If the ingress
mirroring port and egress mirroring port are different mirroring
ports, the RSPAN function can be enabled separately.
Description
Mirror function session number. Three sessions can be supported.
Port list.
Ingress mirroring source port.
Egress mirroring source port.
4-73
Chapter 4 Service Configuration
ZTE Proprietary and Confidential