Set Dhcp Relay Server Retry; Set Dhcp Relay Vclass-Id Server - Zte ZXR10 2900E Series Command Reference Manual

4.44.7 set dhcp relay server retry

Purpose
This command sets the number of retry times of sending packets to the server.
Command Mode
Global configuration mode
Syntax
set dhcp relay server retry <5-1000>
Parameter Description
Parameter
<5-1000>

4.44.8 set dhcp relay vclass-id server

Purpose
This command sets the class-id domain of the serve and the corresponding server IP
address.
Command Mode
Global configuration mode
Syntax
set dhcp relay vclass-id {characters <string>| hex-numbers < hex-string>} server <A.B.C.
D>
Parameter Description
Parameter
characters
<string>
hex-numbers
< hex-string>
<A.B.C.D>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of retry times. The default value is 10.
Description
Specifies that the domain name is in character format.
Domain name in character format.
Specifies that the domain name is in hexadecimal number format.
Domain name in hexadecimal number format.
IP address bound with the domain.
One domain can be configured with up to five server addresses.
4-595
Chapter 4 Service Configuration
ZTE Proprietary and Confidential