Set Zesr Link-Hello - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set zesr ctrl-vlan < 1-4094> level < 1-2> seg < 1-10> preforward <10-600>[ preup < 0-500>]
Parameter Description
Parameter
< 1-4094>
< 1-2>
< 1-10>
<10-600>
preup < 0-500>
Example
The following example sets the preforward time to 11 and preup time to 1 for a node in
level 1 segment 1 VLAN 1 in a ZESR control VLAN:
zte(cfg)#set zesr ctrl-vlan 1 level 1 seg 1

4.29.8 set zesr link-hello

Purpose
This command enables or disables the link-hello function.
Command Mode
Global configuration mode
Syntax
set zesr link-hello < port-id>{ normal | special}
Parameter Description
Parameter
< port-id>
normal
special
Example
The following example enables the link-hello function on port 1/1:
zte(cfg)#set zesr link-hello 1/1 special
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Control VLAN ID in a ZESR domain, range: 1–4094.
Level, range: 1–2.
Segment ID, range: 1–10.
Preforward time, range: 10–600, default: 10, unit: seconds.
Preup time, range: 0–500, default: 0, unit: seconds.
preforward 11 preup 1
Description
Port for which the link-hello function is to be set.
Disables the link-hello function.
Enables the link-hello function.
4-481
Chapter 4 Service Configuration
ZTE Proprietary and Confidential