Radius Isp Client; Radius Isp Sharedsecret - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Default
The default UDP port is 1812.
Example
The following example adds the authentication server with the IP address of 10.40.89.78
to the ISP domain named as test. The default port number is used.
zte(cfg-nas)#radius isp test add authentication10.40.89.78

4.20.34 radius isp client

Purpose
This command sets the RADIUS client address.
Command Mode
NAS configuration mode
Syntax
radius isp <ispname> client <A.B.C.D>
Parameter Description
Parameter
<ispname>
<A.B.C.D>
Guidelines
As a RADIUS client, the switch communicates with the server. In general, the RADIUS
client address is set to a layer–3 port address of the switch.
Example
The following example sets the RADIUS client address to 10.40.89.100:
zte(cfg-nas)#radius isp test client 10.40.89.100

4.20.35 radius isp sharedsecret

Purpose
This command sets the shared password (public key) of the specified ISP domain.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
ISP name
Client IP address
4-398
ZTE Proprietary and Confidential