Udld Port Message Timer - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter Description
Parameter
<portlist>
aggressive
normal
Default
normal mode.
Example
The following example sets port 10 to aggressive mode:
zte(cfg)#udld port 10 mode aggressive

4.38.3 udld port message timer

Purpose
This command sets the packet sending period after the UniDirectional Link Detection
(UDLD) protocol enters BiDirectional status.
Command Mode
Global configuration mode
Syntax
udld port <portlist> message timer <7-90>
Parameter Description
Parameter
<portlist>
message timer<7-90>
Guidelines
After the UDLD protocol enters the BiDirectional status, it sends five Hello handshake
messages at the period of seven seconds, and then continuously sends Hello handshake
messages at the interval configured by this command.
Default
15 seconds.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Aggressive mode
Normal mode
Description
Port list.
Interval (seconds) that packets are sent.
4-548
ZTE Proprietary and Confidential