Set Qos Traffic-Limit Ge-Port|Fe-Port Protect Time; Show Qos Traffic-Limit Protect Time - Zte ZXR10 2900E Series Command Reference Manual

Parameters
Parameter
<1-24>
protect
enable
disable
Default
The rate limit protection function is disabled.

4.14.71 set qos traffic-limit ge-port|fe-port protect time

Purpose
This command sets the port shutdown time when the port rate limit function is enabled.
Command Mode
Global configuration mode
Syntax
set qos traffic-limit {ge-port|fe-port}<1-24>protect time <1-10>
Parameters
Parameter
<1-24>
protect
time
<1-10>
Default
10 minutes

4.14.72 show qos traffic-limit protect time

Purpose
This command shows the port shutdown time when the port rate limit function is enabled.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
Rate limit protection.
Enables the rate limit protection function.
Disables the rate limit protection function.
Description
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
Rate limit protection.
Port shutdown time.
Range: 1 to 10 minutes.
4-351
Chapter 4 Service Configuration
ZTE Proprietary and Confidential