Set Stp Trunk Linktype; Set Stp Trunk Packet Type - Zte ZXR10 2900E Series Command Reference Manual

4.12.10 set stp trunk linktype

Purpose
This command sets the trunk connection type.
Command Mode
Global configuration mode
Syntax
set stp trunk <trunklist> linktype {point-point | shared}
Parameter Description
Parameter
<trunklist>
point-point
shared
Default
The trunk connection type is set to point-to-point.

4.12.11 set stp trunk packet type

Purpose
This command sets packet formats on trunks.
Command Mode
Global configuration mode
Syntax
set stp trunk <trunklist> packettype {IEEE | CISCO | HUAWEI | HAMMER | extend }
Parameter Description
Parameter
<trunklist>
IEEE
CISCO
HUAWEI
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Trunk list.
Sets the trunk connection type to point-to-point.
Sets the trunk connection type to shared.
Description
Trunk list.
IEEE.
Cisco.
Huawei.
4-199
Chapter 4 Service Configuration
ZTE Proprietary and Confidential