Garp/Gvrp Configuration; Set Vlan Permit/Forbid - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
ntp source udp port
ntp is_synchronized
ntp rcv stratum
no reference clock.
ntp clock-period
ntp time zone
ntp authenticate
keyid encryption trust key
----- ---------- ----- -----------

4.24 GARP/GVRP Configuration

4.24.1 set vlan permit/forbid

Purpose
This command permits/forbids dynamically adding ports/trunks to the specified VLAN.
Command Mode
Global configuration mode
Syntax
set vlan <vlanlist>{permit | forbid}{port <portlist>| trunk <trunklist>}
Parameter Description
Parameter
<vlanlist>
permit
forbid
port <portlist>
trunk <trunklist>
Guidelines
When enabling the General VLAN Registration Protocol (GVRP) on ports/trunks, specify
VLANs that permit dynamically adding ports/trunks.
Default
All VLANs permit dynamically adding ports/trunks.
SJ-20130731155059-003|2013-11-27 (R1.0)
: 1000
: No
: 16
: 10
: 0
: enabled
Description
VLAN ID, ranging from 1 to 4094.
Permits dynamically adding ports/trunks.
Forbids dynamically adding ports/trunks.
Port list.
Trunk list.
4-424
ZTE Proprietary and Confidential