Set Poe Port Extend-Detection - Zte ZXR10 2900E Series Command Reference Manual

Command Mode
Global configuration mode
Syntax
set poe port <portlist> forcepower {enable |disable}
Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
When the forced power-on function is enabled for a port, unless short circuit is detected,
the device will ignore PD detection and provide power supply for the port directly. Too
many forced power-on ports will occupy power resources of the ports whose priority is
critical, which causes abnormal operation.
Default
The forced power-on function is disabled.
Example
The following example enables the forced power-on function for port 1.
zte(cfg)#set poe port 1/1 forcepower enable

4.3.5 set poe port extend-detection

Purpose
This command enables or disables the port extend-detection function.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> extend-detection {enable |disable}
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the forced power-on function.
Disables the forced power-on function
4-65
Chapter 4 Service Configuration
ZTE Proprietary and Confidential