Egress-Acl Hybrid Rule Type-Arp - Zte ZXR10 2900E Series Command Reference Manual

Parameter
cos <0-7>
<vlan-id>
<vlan-mask>
<source-mac>
<smac-mask>
any (first)
<dest-mac>
<dmac-mask>
any (second)
Guidelines
Any rule can match ether-type field, cos field, VLAN field, source-specified MAC, any
source MAC, destination-specified MAC and any destination MAC.

4.13.65 egress-acl hybrid rule type-arp

Purpose
This command sets the rule that the hybrid egress ACL matches ARP packets.
Command Mode
Hybrid egress ACL configuration mode
Syntax
rule <1-500>{permit | deny} arp {<sender-ipaddr><sip-mask>| any}{<target-ipaddr><tip-mask
>| any}[cos <0-7>][<vlan-id>[<vlan-mask>]][<source-mac><smac-mask>| any][<dest-mac><dm
ac-mask>| any]
Parameter Description
Parameter
<1-500>
permit
deny
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Optional VLAN mask. The default value is 0xfff.
Source MAC address of the transmitted packet.
Source MAC mask.
The any keyword is used as the abbreviation of source MAC
address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
Destination MAC address of the transmitted packet.
Destination MAC mask.
The any keyword is used as the abbreviation of the destination
MAC address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
4-275
Chapter 4 Service Configuration
ZTE Proprietary and Confidential