Set Trap Macstationmove Enable/Disable; Set Trap Macstationmove History-Sizeinterval - Zte ZXR10 2900E Series Command Reference Manual

Example
The following example sets the maximum number of entries in the MAC notification history
table to 200, and the threshold of the interval that MAC change notification traps are sent
to 1 second:
zte(cfg-snmp)#set trap macnotification history-size 200
zte(cfg-snmp)#set trap macnotification interval 1

5.4.17 set trap macStationmove enable/disable

Purpose
This command enables or disables the MAC move trap function for a port or trunk.
Command Mode
SNMP configuration mode
Syntax
set trap macStationmove {port<1-52>| trunk<1-15>}{enable|disable}
Parameter Description
Parameter
port<1-52>
trunk<1-15>
enable
disable
Example
The following example shows enable the MAC move trap function for ports 1 and 5:
zte (cfg-snmp)#set trap macStationmove port 1,5 enable

5.4.18 set trap macStationmove history-sizeinterval

Purpose
This command sets the threshold and interval of sending MAC move traps.
Command Mode
SNMP configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Port number. The range varies with device type.
Trunk ID.
Enables the MAC move trap function.
Disables the MAC move trap function.
5-21
ZTE Proprietary and Confidential