Zte ZXR10 2900E Series Command Reference Manual page 298

Easy-maintenance secure switch
Hide thumbs Also See for ZXR10 2900E Series:
Table of Contents

Advertisement

ZXR10 2900E Series Command Reference
<0-63>][fragment][cos <0-7>][<vlan-id>[<vlan-mask>]][<source-mac><smac-mask>| any][<de
st-mac><dmac- mask>| any]
Parameter Description
Parameter
<1-500>
permit
deny
udp
<source-ipaddr>
<sip-mask>
source-port <0-65535>
<sport-mask>
any (first)
<destination-ipaddr>
<dip-mask>
any (second)
dest-port <0-65535>
<dport-mask>
dscp <0-63>
fragment
cos <0-7>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for UDP packet. Other packets ignore this
rule.
IP address of the source network or host transmitting packets. It is
a 32-bit IP address expressed in dotted decimal notation.
Source mask and used for source. It is a 32-bit IP address
expressed in dotted decimal notation.
UDP source port number of the transmitted packet
The parameters of source-port can resolve the some known port
numbers. Also the port number and mask can be directly inputted.
Source port mask.
The any keyword is used as the abbreviation of the source 0.0.0.0
and the source mask 0.0.0.0.
Destination network or host of the transmitted packet. It is a 32-bit
IP address expressed in dotted decimal notation.
Destination mask used for destination. It is a 32-bit IP address
expressed in dotted decimal notation.
The any keyword is used as the abbreviation of the destination
0.0.0.0 and the destination mask 0.0.0.0.
UDP destination port number of the transmitted packet
The parameters of dest-port can resolve the some known port
numbers. Also the port number and mask can be directly inputted.
Destination port mask
This rule is only valid for messages with the specified DSCP
value. Ignore this rule for other messages. The range of DSCP
value is 0 to 63.
This rule is only valid for fragment messages. For non-fragment
messages, this rule is ignored.
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
4-238
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents