Set Mac To Permanent - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Command Mode
Global configuration mode
Syntax
set mac unknown-filter {global | port <1-28>| trunk <1-15>} limit-num <0-16384>
Parameter Description
Parameter
global
port
<1-28>
trunk
<1-15>
<0-16384>
Guidelines
If the MAC address table capacity is exceeded, the message does not learn the MAC
address and is dropped.
Default
The function of filtering messages of unknown sources is disabled.

4.7.19 set mac to permanent

Purpose
This command sets the function of transforming MAC addresses from dynamic to
permanent in batches.
Command Mode
Global configuration mode
Syntax
set mac to permanent {port <1-28>| trunk <1-15>}{enable | disable | max-number <1-128>}
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Sets the number of global MAC addresses.
Sets the number of port MAC addresses.
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
Sets the number of trunk MAC addresses.
Trunk ID.
Number of MAC addresses.
4-102
ZTE Proprietary and Confidential